language

    How a Galvanized Scraper Conveyor Is Built for Grain Handling

    Nov 16,2026

    Siez

    The Galvanized scraper conveyor on this page is the scraper machine from Fengde Xinzheng, a maker of steel plate silos and grain machinery. The page gives the drive, the chain, the scraper, the bearing, the plate thickness, the galvanizing and the model table. The models are TGSS16 at 20 T/h, TGSS20 at 25 T/h, TGSS25 at 30 T/h, TGSS32 at 50 T/h, TGSS40 at 100 T/h and TGSS50 at 150 T/h. The page does not give the length, the incline angle, the chain speed or the motor power for each model, so a buyer should ask for a layout drawing and a selection sheet.

    The Scraper Machine

    The page lists a motor reducer as a domestic well-known hard tooth surface reducer or a planetary cycloid reducer, with a service coefficient above 1.2. That service coefficient is a useful margin for a grain conveyor, but the page does not give the motor power, the output speed or the reducer brand. A buyer should ask for the motor and the reducer data for the chosen model. The page does not give a variable speed option or a frequency inverter. The buyer should confirm the control method and the start and stop logic.

    The page says the machine uses a sleeve roller chain and a welded bent plate chain sprocket, both made as integral forming accessories. It says the chain is made of medium and high carbon alloy steel, with good tensile strength and wear resistance. The page does not give the chain pitch, the breaking load or the chain speed. A buyer should ask for the chain drawing and the lubrication method. The page does not give an automatic lubrication option or a chain tensioner type, so both should be confirmed for a long conveyor.

    Scraper and Bearing

    The page names a high-density polyethylene scraper, described as economic, wear resistant and fixed with an anti-loose bolt connection. It does not give the scraper thickness, the scraper width or the spacing. A buyer should ask for the scraper drawing and the expected wear life. The page does not give a nylon or a steel scraper option. For a grain line, the buyer should confirm that the scraper material is food safe and that the bolts will not work loose under vibration.

    The page says the bearing is a UCFS spherical bearing with a seat, with the brands Ha, Wa and Luo named. It does not give the bearing size or the seal type. A buyer should ask for the bearing list and the lubrication interval. The page does not give a dust seal or a water proof option. The buyer should confirm the bearing position and the access for maintenance, because a bearing change on a long conveyor should not need a major strip down.

    Plate and Galvanizing

    The page gives a 6mm high-strength manganese bottom plate, a 3mm high-strength side plate and a 3mm hot-dip galvanized barrel with a galvanized amount of 275 g/m2. Those figures are useful for a wear and corrosion comparison, but the page does not give the plate grade or the bolt class. A buyer should ask for the steel certificate and the bolt spec. The page does not give a wear liner option or a replaceable bottom plate. The buyer should confirm the plate thickness at the feed point.

    The page says the machine has a large split feed on both sides to reduce resistance and material return, and an enclosure to prevent dust from flying. It does not give the inlet size, the outlet size or the dust connection. A buyer should ask for the inlet and outlet drawing and the dust extraction point. The page does not give a clean-out door or an inspection hatch. The buyer should confirm the access for a blockage and the safety guard around the chain and the drive.

    Models and Ordering

    The page gives the model table and the yield range. It does not give the running noise, the residual grain or the incline limit. A buyer should send the grain type, the capacity, the length, the incline, the layout, the power supply and the dust control, and ask for a model selection and a drawing. The buyer should also ask for the spare parts list, the wear parts and the installation method. The page does not give a warranty term or a commissioning service.

    The company page says Fengde Xinzheng integrates R&D, design, production, sales and installation of steel plate warehouses and grain machinery, and can supply a complete grain screening, drying, storage and turnover system with custom design, technical support and spare parts. That scope is useful for a silo project, but the page does not give a factory size or a project list. The contact is hsfdxz@163.com, +86-318-4826789 and +86-15175807999. For a first order, a factory visit and a test run on the buyer grain are the practical way to check the Galvanized scraper conveyor before a full line order.